The following 15 types attachments for trimmer are shown here
The information is intended for residents of Great Britain, USA, Canada, Australia, New Zealand.
- Attachment Drill for petrol trimmer (works without electricity).
- Attachment Runner wheels, to work with a brush.
- Attachment Lopper, working on the principle of a handsaw.
- Attachment Hedge Trimmer for cutting hedges and shrubs.
- Attachment lawn Aerator for the destruction of a crust on the surface of the lawn.
- Attachment Cultivator to loosen flower beds.
- Attachment Chainsaw to cut branches to a height of 4.5 meters from the ground.
- Attachment Reducer, for instance, as a motor for a bicycle.
- Attachment Water pump for pumping water from a well or lake.
- Attachment Bristle and Sweeper Brush for garden paths and lawns.At.
- Attachment Trimmer Trolley.
- Attachment Boat motor.
- Attachment Snow thrower to clean paths and the ground of snow.
- Attachment Blower for blowing fallen leaves from paths.
- Attachment Edger to align the edges of flower beds and lawns.
Let’s take a closer look at trimmer attachments.
The trimmer head includes a variety of metal and plastic blades for mowing grass and cutting tree trunks, bushes and branches with a diameter of up to 14 cm.
Trimmer Attachments are attached to the trimmer in one of three ways: a reducer on the bottom of the trimmer, instead of the drive shaft near the motor and the method of separation trimmer pipe in the middle. The motor of a trimmer can operate in any position and has a high power density (power in relation to weight), it is also compact and reliable, it can be used with many attachments, which are presented below.
Trimmer Attachments — Drill
Attachment Drill is a nozzle for a petrol trimmer (for such drills electricity is not necessary). In addition, a gasoline drill has higher capacity, reliability and durability (as compared to an electric drill). The enormous torque on the drill provides a reduction gear with a ratio of 17:1. Available cartridges 3 sizes. With the Echo trimmer specifications: engine capacity — 25.4 cm3, capacity -. 0.68 kW / 0.92 hp, weight (dry) — 4.7 kg.
Trimmer Runner wheels Attachment
Used in conjunction with a blower or other attachments for trimmer as needed. Very comfortably to use running wheels for trimmer with a brush — a brush can be lifted to reduce friction on the surface (it is easier to operate, less wear, better results and enjoy their work).
Trimmer Attachments — Pruning Lopper
Attachment Lopper is designed for cutting twigs and branches to a height of 4.5 m. The appointment is the same as that of the attachment Pole Saw, but if the Pole Saw works on the principle of a chainsaw, that Lopper works on the principle of a hacksaw. Blade length — 10 cm. Speed — 2000 strokes per minute. Weight — 2.1 kg.
Trimmer Hedge Trimmer Attachment
Attachment hedge trimmer is designed for cutting hedges and bushes curly — two versions of different lengths for different situations. The maximum diameter of the branches — 20 mm. The length of the cutting edge (solid, two-way) — 55 cm. Weight — 2 kg. The apparatus can operate at an angle of 180°.
Trimmer attachments – lawn Aerator
Attachment «lawn Aerator» is designed to saturate with air the upper layer of soil (by piercing). This is especially important for lawns older than 5 years old with thick roots. Also, it is designed to break a crust on the soil surface after rain or irrigation. Working width — 20 cm.
Trimmer Cultivator Attachment
Attachment cultivator designed for loosening the soil in flowerbeds, flower beds, greenhouses, small vegetable gardens, around trees and shrubs. Diameter cutters — 20 cm. Turnovers cutter — 180 / min. Works width — 12-24 cm (depending on the engine power trimmer). Weight — 5 kg. The disadvantage of this cultivator is its light weight (trimmer attachments) — it handles well the top layer, especially newly tilled soil. However, on solid ground, it scratches the surface, but the soil does not climb. Also, it is impossible to pres the cutter hard as it may bend the pipe and damage the trimmer or cultivator.
Trimmer Attachments — Chainsaw
Attachment Pole Saw is designed for cutting branches and bushes up to 15 cm thick and thinning crowns of trees to a height of 4.5 m from the ground. It is found near the gear oil tank in the housing with the connecting hole. Bar length — 21 cm. When selecting a nozzle Chainsaw is necessary to check whether the same in the head and trimmer on the size and shape of the splines of the drive shaft.
Trimmer reducer (Reducer attachment for trimmer)
Attachment reducer for trimmer can be used as a motor for a bicycle, moped, kart, ATV, snowmobile, etc. Reducer reduces the speed engine 5 times. You can change the direction of the output shaft. You can also change the drive sprocket — to put an asterisk with any number of teeth, thus select the desired gear ratio.
Trimmer Attachments — Water pump
Attachment water pump allows you to pump water from rivers, lakes, reservoirs, wells, etc. for watering the garden, washing the car, domestic water, pool filling, pumping water out of the cellar, etc. The height of water lift — 8 m. Range of pumping water — 30 m.
Trimmer Attachments – Bristle and Sweeper Brush Attachment
Trimmer Brush Attachments — rotating brush effectively sweeps debris without damaging the surface. This attachment for trimmer is designed for sweeping garden paths, areas, fallen leaves, cut grass to cleaning the surface of the lawn, removing the moss. Especially effective brush with wheels for trimmer. It can be made as a brush (as pictured), but can be a rubber roller (as in the video). Width — 60 cm.
Trimmer Trolley Attachment
The new wheel for trimmer facilitates work trimmer with attachments. This attachment can be mounted on the trimmer at different positions, which ensures its versatility. Wheel allows you to maintain the same cutting height of the lawn, and the same depth and width of the processing when working Beveller in flowerbeds and garden paths. The nozzle is equipped with two support wheels for Beveller or one wheel for trimmer. Also, the support wheel can be used with a blower or brush.
Trimmer Attachments — Boat motor
Attachment «Boat motor» is designed for rubber, wood and metal boats with transom height up to 36 cm. Depending on the power of the engine trimmer, counter-current and headwinds, the boat can reach speeds up to 20 km / h (!) with a fuel consumption of about 1 liter. per hour (depending on the load). Attachment boat motor assembly — the adapter to connect to the trimmer, drive propeller, control knob, the retention mechanism on the boat, etc. First you have to remove the drive shaft trimmer, cable and wire management. Need to connect to the engine the propeller, accelerator cable and wire to the engine. Frequently, the attachment «boat motor» is bought by fishermen, hunters and those who live near the water, or reach on the water. Lack of attachment «boat motor» — is the noise (fishermen and lovers of silence also need paddles). When selecting attachment boat motor it is necessary to pay attention to the drive shaft attachment slots were the same as on the drive shaft trimmer.
Trimmer Attachments — Snow thrower
Trimmer Add-On Turbo-Blower
Attachment Blower is designed for blowing fallen leaves, grass clippings and small debris from paths, lawns, playgrounds. The narrow nozzle is used for maximum flow to blow away in remote places, as well as wet and sticky foliage. air flow rate: 230 km / h. The air intake in the upper portion of the plastic body, which eliminates clogging and blowing from the front surface parallel to the ground. Trimmer Blower Attachment Service does not need to.
Trimmer Attachments — Edger
If you see an error in the text, please send a comment about this or E-mail: firstname.lastname@example.org