In the three reviews are shown 35 types attachments for chainsaws (with descriptions, photos, video).
In this review are the following chainsaw attachments: Angle grinder with grinding discs, Fumigador, Rail Screwing Machine, Reducer, Grinding wheel, Cut-off unit, Cut-off saw, Ice Auger, Earth Auger, Firewood Cutting, Circular saw, Cleaver, Air compressor, Machine tool for cutting firewood chainsaw.
In the previous review are the following chainsaw attachments: Lawn mower, Hedge trimmer, Milling, Vertical milling, lawn Aerator, Boat motor, Automobile generator, Motorized bicycle, Helicopter, Tiller.
The next review will the following attachments for chainsaws: For Geological Sampling, Hydraulic Chainsaw, Tapered Tenon Joinery, Water pump, Debarker drum, Debarker disc, Trencher, Trimmer, Snow thrower, Winch, Drill (Choose!).
Chainsaw attachments — Angle grinder with grinding discs
Chainsaw fumigador attachment
This attachment is a lightweight thermal inhaler, which poisons ants, killing the entire colony by asphyxia ing 10 minutes. Fumigator has no effect on crops. Weight — 3.6 kg. Tank Capacity — 2 liters.
Chainsaw attachments — Rail Screwing Machine
Chainsaw reducer attachment
Attachment for chainsaw «Grinding wheel»
Chainsaw attachments — Cut-off unit
Chainsaw Angle Grinder Attachment (Cut-off saw)
Attachment for chainsaws «Power cutter» is a body on which is mounted belt drive for the cutting wheel drive. Belt drive consists of a drive pulley bearings (which is installed in place of the clutch chainsaw), the belt and the driven pulley with a flange for fixing the cut-off wheel. Power cutters that can cut metal, stone, brick or concrete, depending on the type of cut-off wheel. The parameters of the cutting circle: maximum diameter — 180 mm, mounting hole — 22 mm, belt — 670 Z.
Chainsaw attachments — Ice Auger
Attachments drill designed for drilling holes in the ice with a diameter of 20-35 cm. Attachments need a reduction gear to reduce the speed of the drill up to 150 rev / min. Options include a belt drive or a mechanical reductor. This determines the reliability, durability and price attachment auger equipment. The advantage of attachments for chainsaw augers is that it is used rarely and buying a separate device for drilling holes is impractical (best to use attachments for chainsaws to save funds and use equipment more effectively). The main chainsaw: STIHL (from the MS180 to MS250). Screw diameter: 200-350 mm. Screw length: 1 m. Maximum speed: 150 rev / min.
Chainsaw attachments — Earth Auger
How to install attachment MB-2 on the chainsaw. Remove from the chainsaw clutch (light blow in the direction of the arrow unscrew the grip counterclockwise) and remove everything that is on the shaft — washer, sprocket, another washer. Then, put the adapter, which is included (screwed onto the shaft counterclockwise until it stops), put the bushing, install attachments, spin two nuts, check the clutch rotation (it should be free), tighten the screws completely. Then we set the auger, fix it and put a safety screw. Attachments for chainsaws Earth Auger installed. MB-2 is a device for chain saws STIHL (from the MS180 to MS250) and is intended for drilling holes in the ground with a diameter of 200-350 mm.
Technical characteristics of the attachments for chainsaw «auger for soil» MB-2 (Earth Auger).
The gear ratio is 1:56.
The diameter of the drill is 200 mm.
The number of revolutions at full power is 150 rpm.
The length of the auger is 1000 mm
Chainsaw Firewood Cutting Attachment
This attachment for chainsaw allows you to lift and secure the log. This is done to ensure that the chain does not touch the ground (can extend the life of the chain). This attachments for chainsaw helps cut logs easily and safely.
Chainsaw attachments — Circular saw
Attachment circular saws are quite rare in our workshops and garages, but look at the video as it is effective — quick and easy to trim the board and more. The principle of operation is the same as that of the attachment for the saw ‘Power cutters «. But then there is still a base plate, fabricated and other protection in place of the cutting circle — a circular saw.
Attachment for chainsaw «Cleaver»
Attachments «Cleaver» is intended for splitting firewood length 40-80 cm. Cleaver consists of a step-down reducer (1:56) and a conical screw tip. The cone can be one of three sizes for different purposes.
Chainsaw air compressor attachment
Machine tool for cutting firewood chainsaw